Description


Page : 1720

Sondrestrom Lidar Operation Log


Operator(s) : E.Guðmundsson, M.McCready
Purpose : Routine data collection
Date(s) : 060313 - 060313
File(s) : L20060313_000 - L20060313_004
Comments : Just replaced flash lampos in the Rayleigh system and did some minor adustments
on the HG location. Replaced input 1/2 wavveplate (1064nm).
Logfile : l0603130.log

Setup:0


Page : 1721
[Variables]
Dye Power=85mJ
Rayleigh Power=530mJ

[0]
front end Iris=not_installed
Rayleigh System=On
Rayleigh Field stop=1.5mm
Rayleigh path attenuation=0dB
Dye System=On
Sodium Field stop=1.5mm
Etalon=Out
Daystar=Out
Polarizer=In
HalfWave Plates=Tracking
Rayleigh Filter=2:532(.5nm)
Rayleigh seeding=off

Logsheet:0


Page : 1722

Sondrestrom Lidar Operation Log


Log Sheet 1 of 1
Operators : E.Guðmundsson, M.McCready
Date(s) : 060313 - 060313
File(s) : L20060313_000 - L20060313_004
FilesTime [UT]CommentsCntSOpe
L20060313_00000:51:37Start of experiment0EG
L20060313_00001:23:49Just fixed a problem with the Rayleigh receiver. Bad PMT0EG
amp channel. Changed to an unused Channel.
L20060313_00001:27:27Training. Killing application6090EG
L20060313_00001:32:18restarted experiment for training0EG
L20060313_00101:36:56Dye system tuned to 589.160 nm6080EG
L20060313_00101:40:20Sodium HG adjusted6000EG
L20060313_00103:05:56sodium layer has split into two peaks5380MM
L20060313_00204:31:45Dye system tuned from 589.162 to .1605760MM
L20060313_00205:51:30sodium system halted with error message about not finding the log file. Okay seems to clear it okay5250MM
L20060313_00205:53:13incremented file5240MM
L20060313_00308:13:36GPIB error on sodium system3940MM
L20060313_00408:14:39incremented3800MM
L20060313_00408:52:16End of experiment3960MM